BLSZS - TOUGH QUENCH

  • MSDS: BLSZS
  • Manufacturer: BROWNELLS INC
  • Product Name: TOUGH QUENCH
  • National Stock Number: 9150-00N017435
Product Identification

Product ID:TOUGH QUENCH
MSDS Date:03/16/1990
FSC:9150
NIIN:00N017435
MSDS Number: BLSZS

Responsible Party
BROWNELLS INC
R 2 BOX 1
MONTEZUMA, IA 50171
US

Emergency Phone: 515-623-5401

Info Phone: 515-623-5401

Cage: 12238

Contractor
BROWNELLS INC
MONTEZUMA, IA 50171 US

Telephone: 515-623-5401

Cage: 12238

Ingredients

MINERAL OIL, PETROLEUM DISTILLATES, SOLVENT-REFINED HEAVY

CAS: 64741-88-4

RTECS: PY8040500

Fraction By Weight: 10%


MINERAL OIL (LIMIT GIVEN AS OIL MIST)

CAS: 8012-95-1

RTECS: PY8030000

Fraction By Weight: > 60%

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL: IF MISTING, POSSIBLE IRRITATION
UPPER RESPIRATORY TRACT. EFFECTS ARE EXPECTED TO BE MINIMAL
PROVIDED TLV IS NOT EXCEEDED. SKIN & EYES-MILD IRRITANT. INGEST:
EFFECTS NOT KNOWN, BUT ARE EXPECTED TO BE MINIMAL.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:INHAL: REMOVE TO SOURCE OF FRESH AIR. SKIN: WASH WITH SOAP
AND WATER. EYE: FLUSH WITH WATER FOR AT LEAST 15 MIN, CONSULT
PHYSICIAN. INGEST: DO NOT INDUCE VOMITING, CONSULT PHYSICIAN.
PRODUCT IS MAINLY MINERAL OIL.

Fire Fighting

Flash Point Method:COC
Flash Point:355F,179C
Extinguishing Media:CARBON DIOXIDE, FOAM OR DRY CHEMICAL.
Fire Fighting Procedures:TREAT AS AN OIL FIRE.
Unusual Fire/Explosion Hazard:NONE

Accidental Release

Spill Release Procedures:CLEAN UP SMALL AMOUNTS WITH DRY ABSORBENT
MATERIAL. FOR LARGER AMOUNTS, DIKE TO CONTAIN AND EITHER REUSE OR
DISPOSE OF, DEPENDING ON CONDITION.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:AVOID CONTACT WITH STRONG OXIDIZERS.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:REQUIRED ONLY IF TLV IS EXCEEDED AS OIL MIST.
Ventilation:LOCAL EXHAUST ADEQUATE IF NOT MISTING. MECHANICAL SHOULD BE
USED IF MISTING.
Protective Gloves:RUBBER GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE NORMALLY REQUIRED.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

Boiling Pt:B.P. Text:600F,316C
Vapor Pres:NIL
Vapor Density:> AIR
Spec Gravity:0.88 (H*2O=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:DARK GREENISH-AMBER LIQUID, OILY ODOR.
Percent Volatiles by Volume:NIL

Stability

Stability Indicator/Materials to Avoid:YES
THERMAL-OXIDES OF CARBON
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.

Disposal

Waste Disposal Methods:FOLLOW FEDERAL, STATE & LOCAL REGS FOR DISPOSAL
OF WASTE OIL. CAN BE INCINERATED UNDER CONTROLLED CONDITIONS. THIS
PRODUCT FAILS THE RCRA EP TOXICITY TEST, WHICH CLASSIFIES THIS
MATERIAL AS HAZARDOUS WASTE IF DISCARDED.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.